Framo technology used to successfully install offshore wind turbine foundations

Cimentación de cubo de succión. Foto cortesía de NGI

Suction bucket foundation. Photo credit: NGI

Framo’s pump technology has been used to successfully anchor 20 wind turbines at the offshore wind farm Burkum Riffgrund 2.

A total of 60 suction buckets have been pumped in place as foundation for the 20 offshore wind turbines in Ørsted’s new wind farm Borkum Riffgrund 2. In June 2018, a team of specialists from Framo, the Norwegian Geotechnical Institute (NGI) and GeoSea installed the first of the 20 suction bucket jackets at the offshore wind farm. After periods of storm and high waves, the foundations of all 20 wind turbines were safely pumped into the seabed with the final jacket foundation installed on Monday, 30 July. The full commissioning of the wind farm is planned for early 2019.

The suction bucket jacket technology for offshore wind farms has gone from concept to reality during the last five years. Besides lowering costs due to the increased installation speeds compared

to traditionally piled jackets, the concept provides for easier decommissioning and practically noise free installation.

This is the first time Framo’s technology has been used to pump so many wind turbines in the same wind farm and is quite unique that so many wind turbines are anchored with suction anchors in one field.

Framo is a sub-contractor to NGI in the installation of the 20 offshore wind turbines. NGI and Framo have collaborated on the installation of offshore anchoring and foundation elements using suction/vacuum since the 1990s.The technology of suction and bucket foundation has been used to secure and safely anchor platforms and offshore installations around the world. Now larger wind farms are being built with this technology. The foundation is installed by pumping water out of the buckets. This creates a suction/vacuum, which press the buckets into the seabed.

The windfarm Borkum Riffgrund 2 is located 54 km off the coast of Lower Saxony, in the German North Sea. In the installation of the 56 wind turbines, 20 will use the suction bucket technology as foundation and 36 will be supported using monopiles. The three-legged foundations measure more than 50 m in height and weighing 950 t each.

Source: Framo