Amplex-Emirates LLC was awarded a pilot project by Dubai’s Electricity & Water Authority (DEWA) to install a battery energy storage system (BESS) at the Mohammed Bin Rashid Al Maktoum Solar Park in Dubai; the first energy storage system paired with a photovoltaic plant at a grid-scale level in the United Arab Emirates. NGK Insulators LTD supplied its NAS batteries and Ingeteam was responsible for the supply of a 1.2 MW power conversion system (PCS) with its medium voltage components (power transformer, MV switchgear, etc.), and the power plant controller (PPC).
Dubai has accelerated investment in renewable energy to eliminate dependence on fossil fuels and for sustainable economic growth, and is building the Mohammed bin Rashid Al Maktoum Solar Park, the world’s largest solar park, in the south of the Emirate. Dubai is targeting introduction of 5,000 MW of solar PV and CSP by 2030, which will raise the ratio of renewable energy to 25% of total generation capacity. Furthermore, Dubai is seeking a 75% power output from clean energy sources by 2050.
The Ingeteam supply was comprised of a 1.2 MVA power station equipped with two storage inverters and all the rest of components for a LV-to-MV and DC-to-AC conversion (medium voltage transformer, medium voltage switchgear, etc.). These inverters have been conceived to perform according to the most demanding international grid codes, featuring some very advanced operating functions such as black start capability. Moreover, they are suitable for both stand-alone and grid-tied systems. Also, Ingeteam supplied the Power Plant Controller (PPC) and the BMS interface control that manages the operation of the overall system, developing the more advanced control features, such as:
- Energy Time Shifting. This control mode enables an advanced power generation planning, making the power plant’s production profile unmatch the consumption profile, allowing electric utilities to address daily peak demand that falls outside periods of solar generation.
- Predictable PV+BESS production: The BESS is connected in the boundary of the PV plant and receives the real-time PV production. The power station automatically changes the active power according to the PV production variations to ensure a PV+BESS predictable power production in the common point of connection at the Syhaslm- 33/11kV substation.
- Fast Frequency Regulation. The system adjusts the power production depending on the frequency variations.
- Voltage Droop Control. According to an established droop gain, the system selects the necessary reactive power at the point of connection, depending on the existing voltage difference.