In recent years, increasing pressure to drive down wind turbine manufacturing prices has spurred enormous advances in technology. For example, turbine and rotor sizes have grown at an impressive speed, and many other innovations have enabled significant improvements in terms of energy output and cost efficiency. The introduction of auction systems for tendering onshore and offshore projects in a growing number of countries around the world has contributed to intensifying international competition, resulting in substantial (project) lifecycle-based price drops and huge value-chain cost reduction pressure.
At the Global Wind Summit in Hamburg, the industry will demonstrate and discuss what can be achieved by current and emerging technologies. From 25 to 28 September WindEnergy Hamburg, the world’s leading expo for the onshore and offshore wind industry will open its gates, featuring 1,400 exhibitors from around the world. In parallel, WindEurope will hold its global conference at the Hamburg Messe site.
A crucial factor enabling cost reductions is the growing trend towards industrial-scale series production. As a consequence, existing supply chains are used more extensively, product development costs drop, and the technology and overall risk profile becomes more favourable. The ongoing cost reduction pressure affects hardware suppliers, project developers, financial and legal consultants, and other parties, forcing them to find the most cost-effective solutions to present in auctions and project tenders.
In several key renewable energy markets, including Germany and India, onshore wind and solar increasingly compete for the lowest prices in auction system tendering rounds. For example, the winning prices in India’s first federal (onshore) auction, which totalled 2 GW, were as low as US$ 0.038/kWh. By comparison, solar tariff bids in India fell to a level of just INR 2.97/kWh this year. The Dutch auction system successfully concluded its first non-subsidised offshore wind tender for the 700-750 MW Hollandse Kust I & II project earlier this year. The tender winner, the Swedish utility and WindEnergy Hamburg exhibitor Vattenfall, will build the wind farm with ‘non-decided’ 6-12 MW turbines, and the project should be completed by 2022. Leading offshore turbine and main component suppliers in Hamburg will inform visitors on features and benefits of current product offerings and their competitive advantages in auction scenarios.
An increasingly common wind industry strategy are modular platforms with flexible ratings, plus multiple rotor sizes and various available hub heights (onshore) to optimally match specific market and geographical conditions. Mean wind speed is a key product driver and a main variable for right configurations in achieving maximum cost effectiveness performance. GE Renewable Energy for example offers a 2 MW platform with flexible ratings between 2 – 2.7 MW and 116-m rotor size, and in 2.2 – 2.5 MW plus 127 m. They and other suppliers will explain visitors on the features and benefits of turbine platforms with high configuration flexibility.
Local production facilities
Localisation of production is another key topic on the agenda of the wind industry, and increasingly a binding requirement in many (emerging) wind markets. India is a typical low-wind market and the second largest in Asia. The WindEnergy Hamburg exhibitors GE, Nordex Acciona, Senvion, Siemens Gamesa, Vestas all manufacture their 2 MW+ low and medium-wind models in-country, which has a favourable impact on turbine CAPEX and thus on the overall project cost-effectiveness. The typical specific power ratings of these products in the 175 – 205 W/m2 range aim at boosting annual yield, thereby contributing to higher asset long-term cost-effectiveness. The Nordex Acciona 3 MW AW3000 series is the most powerful turbine produced in the country, with the latest current flagship model for auctions, the AW140/3000 featuring a 140-metre rotor diameter (195 W/m2). Enercon announced its re-entry into the Indian market with a 3.5 MW EP3 model boasting a 138-metre rotor diameter. The first turbines are expected to be erected in early 2020.
Components custom-tailored to the specific requirements of local markets are another key to unlock additional saving potential. For example, the Argentinian government intends to install 6-7 GW of onshore wind power by 2025. This means that the country is poised to become Latin America’s second largest wind market in the coming years. As in other Latin American countries, the product-market focus rapidly shifts to 3MW and the largest 4-5 MW models. Several WindEnergy Hamburg exhibitors have concrete objectives for this emerging fast-growth market.
Known current bottlenecks include an inadequate port infrastructure and the unavailability of suitable special cranes which are needed because of the very high mean wind speeds of up to 12 m/s in the country’s South. To avoid costly downtime during installation because of weather, Enercon will employ innovative climbing crane and bolted-steel tower technology in Argentina which it recently acquired after buying the Dutch company Lagerwey. Furthermore, Enercon will introduce the new 4 MW E-126 EP3 in the country.
Another example of new materials and methods in focus for mature as well as emerging onshore markets is the use of concrete towers in Brazil due to high steel prices in the country. German exhibitor Max Bögl Wind has for many years supplied its proprietary concrete-and-steel hybrid towers with hub heights of up to 180m, especially for low-wind projects in Germany. The cost-effective use of high towers raises yields by 0.75 – 1% for each extra metre added, thanks to stronger and more stable wind speeds at greater heights. The company introduced its high-rise towers to the US earlier this year and already produces them in Thailand using a pre-fabricated mobile factory for the first time which the company developed in-house.
WindEnergy Hamburg and Husum Wind
The world of wind energy gathers in Hamburg for the Global Wind Summit every two years.
The Global Wind Summit will be held in Hamburg, the capital of the wind industry, from 25 to 28 September 2018. At WindEnergy Hamburg, roughly 1400 exhibitors from around the world will present their product innovations and projects. The world’s leading wind industry expo for the onshore and offshore wind industry mirrors the global market and its entire value chain.
In parallel, WindEurope will hold the Global Onshore and Offshore Conference in the halls of Hamburg Messe. In several sessions at the global WindEurope conference in Hamburg, industry visitors will learn more about how to compete successfully in auction-driven markets. The third day of the conference will feature workshops and lectures on topics such as “Designing auctions: What we have learned and where we should go”, or “Risk mitigation in a merchant world” and “Under pressure? The impacts of LCOE reductions on the supply chain”.
Source: Hamburg Messe