Lithium-ion batteries from Germany

Germany makes electric cars, but not the batteries that power them. To change this, the government and industry have stepped up their research and development activities in recent years. These efforts are now bearing fruit: A joint endeavor with the Centre for Solar Energy and Hydrogen Research Baden-Württemberg (ZSW) has succeeded in manufacturing automotive-grade lithium-ion cells industrially in a pilot plant.

The facility has made standard cells in PHEV 1 format fully automatically, at a high production rate. Funded by the Federal Ministry of Education and Research and the State of Baden-Württemberg, the 3,000+ square meter pilot production plant at ZSW is equipped with specially developed manufacturing systems and has been in operation for over a year. The pilot line operation commenced in early 2015.

The experience gained at the ZSW pilot plant has helped significantly bring down the technological barriers impeding the commercial production of battery cells in this country.

Some companies are already aware of this and pitched in to gear up the technology for this endeavor; specifically, BASF, BMW, Daimler, Elring Klinger, Manz, Robert Bosch, Rockwood Lithium, SGL Carbon and Siemens. The pre-competitive research platform in the ZSW Laboratory for Battery Technology (eLaB) at Ulm is open to all companies and research institutions seeking to research battery cell production with advanced materials and manufacturing processes.

More than 1,300 kg of active materials and 11 km of electrode sheets20140805_050_ZSW-60-l-Mischanlage

Since operations kicked off a year ago, ZSW has processed 1,300 kg of active materials into slurries, coated 11 km of electrode sheets, and assembled more than a thousand cells automatically using these components. The plant’s capacity to manufacture at the target rate of one cell per minute and steadily reduce scrap rates was demonstrated successfully.

It will take more development effort to meet all the requirements for future cells, for example, for capacity and durability targets. Nevertheless, these results attest to the impressive success that the German industry and the research community have jointly achieved in recent years. To date, only very few German experts understood the entire manufacturing process for lithium-ion cells from the production of electrodes and cell assembly to formation and testing.

The researchers opted for the most widely used combination of materials, lithium nickel manganese cobalt oxide (NMC)/graphite, to qualify manufacturing processes. Advanced materials that enable higher energy densities to extend vehicles’ range will be employed in newly launched projects. The researchers also aim to optimize cell design and the individual manufacturing processes.

Global e-car boom, an opportunity for German industryZSW-Elektrodenband

Electric vehicles are making inroads around the world. More than 500,000 were manufactured worldwide in 2015. New factories are being built mainly in Asia to meet the automotive industry’s fast-growing demand for batteries.

Lithium-ion cells are the heart of electric cars. They determine the range, safety and cost of an e-vehicle and contribute up to 40 percent of value-add. Local battery cell manufacturing presents an opportunity to maintain the automotive industry’s vertical integration and value-add, which is so extensive and so important to Germany.